12V Diaphragm Water Pump with Hose Clamps and Pressure Switch

Performance parameters of the 12V Water Pump:

• Power: 60W
• Voltage: DC 12V
• Vertical suction: 5.8ft
• Pressure: 87 PSI
• Max Output: 1.2 GPM

This 12V Water Pump is versatile and can be used for various applications such as fish tank draining, precision car wash, watering forest gardens, and shower spray.

If you are considering running the pump on a 24 volt system, you can purchase two pumps and run them in series. However, make sure to closely monitor the fuse on the amperage draw of the pumps.

For those looking to replace a pump in an RV sink or bathroom, it is important to check the gallons per minute needs to ensure compatibility.

This water pump can provide "on demand" fresh water for sprayer applications. It can be used as a replacement pump that offers more pressure than the original pump at half the price.

Key parameters of the 12V water pump include 3/9-inch hose barb ports, vertical suction lift of 6.6ft, and adjustable cut-off pressure ranging from 87 to 120 PSI.

There is an arrow on the left side of the water pump electric cover that indicates the direction of the water outlet. It is important to connect the water pipe in the direction of the arrow. The pump also comes with 2 tube clamps.

Before use, please note that all water pumps have been tested for voltage and water pressure to ensure quality. Some water inside the pump may be normal and will not affect performance.

The diaphragm pump is sealed to prevent moisture and dust from entering. It is not recommended to run the pump continuously for more than 6 hours. The pump can be operated in wet environments and is equipped with sealed switches and coatings for increased service life.

The water pump has a wide range of applications including marine, caravans/RV, garden sprinklers, lawns, showers, boat taps, boats, family gardens, and camping. It is an ideal choice for agricultural and domestic use.

product information: